Specialist Coatings

Epoxy Resin Floor & Wall Coatings

Water Based Epoxy is a two part dispersed epoxy coating. It contains no solvents, therefore it is odour free. Water Based Epoxy is also non-flammable and is also suitable for application onto damp surfaces.Water Based Epoxy is suitable for use as an adhesion promoting primer to dense concrete surfaces such as power floated concrete in a wide range of locations such as dairies, abattoirs, food preparation areas, and factories. The cured material is non-toxic and is suitable for use in contact with drinking water and foodstuffs.

Typical Usage: Production, Areas Food, Production, Car Park Decking, Warehousing, Factories, Workshops
Advantages: Low odour, Easily applied, High Solids Content Coating, Solvent Free, Excellent adhesion to concrete, Water Dilutable.

Should a non- slip finish be required, an appropriate aggregate is broadcast immediately after the first coat to render the substrate slip resistant.

Recommended two coat treatment, providing an overall d.f.t. of 200 – 300 microns.

Solvent Free Epoxy HB ,developed to provide protective and decorative properties to concrete, steel and other substrates. The material is supplied as a two pack system, Comprising pre-weighed amounts of base and curing agent. After mixing all components together, an easily applied chemical and abrasion resistant finish is produced.

Typical Usage: As a waterproof, tough, chemical resistant floor or wall coating in food preparation areas, breweries, abattoirs, bottling factories, etc. As an internal lining for concrete or steel storage tanks containing oils, chemicals, water, etc. It is particularly suitable for chemical bunds.

Should a non- slip finish be required, an appropriate aggregate is broadcast immediately after the first coat to render the substrate slip resistant.

Recommended two coat treatment, providing an overall d.f.t. of 425 – 500 microns.

Self Levelling Epoxy has been designed to provide a hard wearing, impervious, seamless floor finish which is hygienic and easy to clean. Self Levelling Epoxy with its combination of attractive gloss finish and excellent resistance to many chemicals is suitable for a wide range of industrial environments. A fast cure grade is also available. Self Levelling Epoxy is typically applied at thicknesses of between 2mm and 4 mm.

Typical Areas of Usage

Laboratories, Pharmaceutical Plants, Electronics Assembly, Warehousing, Manufacturing Facilities, Workshops

Advantages
Impervious to liquids, Hard wearing, Hygienic and easy to clean, Excellent chemical resistance, Excellent adhesion to concrete, Seamless floor finish

RESIN SCREEDS provide floor toppings with a minimum depth of 5mm. Resin Screed is suitable for use where a hard wearing, impact resistant screed is needed, with high compressive and flexural strengths.
It is widely used in warehousing, chemical plants, food processing plants and indeed anywhere a high strength floor topping is required.

Advantages
Good Flexibility, No Shrinkage Repair, Chemical Resistant, Easy to use, High Strength, Good trowelling properties leading to ease of application, Good Adhesion, Solvent Free, Low Odour, Choice of colour range, Easy to use

This website uses cookies to ensure you get the best experience on our website. More Info